Richard Mille RM 60-01 Les Voiles De St Barth

As the main sponsor of the Les Voiles De St Barth Regatta, Richard Mille launched the limited edition RM 60-01 Les Voiles De St Barth. As the event cannot be held this year, the brand reiterated its commitment and intends to donate all proceeds from the sale of RM60-01 to St. Bart’s initiative. This watch has a 50mm case made of titanium and carbon TPT. It also has a flyback chronograph and annual calendar. With its rotating bezel, this watch can also be used as a compass.

Housing and materials for RM 60-01 Les Voiles De St Barth
Richard Mille chose a round case of 50 x 16.33 mm. It consists of four separate parts, including long titanium lugs. The middle part is also made of titanium, but with carbon TPT blades. In addition, 46 titanium screws hold the case together. Richard Mille can also lock the two timing buttons by turning the black ring on the crown. However, UTC pushers that add pointers to the second time zone are not affected by this.

The case also has a rotating bezel made of titanium and carbon TPT, with four base point indicators, a 360° measuring disc and a 24-hour scale. Together with the red UTC pointer, sailors can determine their direction as if they were using a compass. First, the red hand is aligned with the sun. Then turn the bezel so that the hands correspond to the current hour in local time. Now, the correct direction of North, East, West, and South will be shown to the wearer.

The dial of Richard Mille RM 60-01 Les Voiles De St Barth is made of sapphire crystal, so the mechanism can be seen. In addition, the manufacturer placed a turquoise flange with a dot index around the dial. Two large hands with luminous material indicate the time. There is also a small second hand with a yellow pointer at 3 o’clock. This watch has an annual calendar that can distinguish between 30-day and 31-day months. To this end, there is a large date window at 12 o’clock, and the current month is displayed from 4 o’clock to 5 o’clock.

The time measurement of the flyback chronograph is displayed on the countdown subdial at 9 o’clock. Here, the pointer is replaced with a disc, which can be used to read the elapsed minutes and the remaining time of an hour. In addition, there is a 24-hour totalizer at 6 o’clock.

Caliber RMAC2
Through the sapphire crystal case back, you can see the Manufacur movement RMAC2 in Richard Mille RM 60-01 Les Voiles De St Barth. It also provides a 55-hour power reserve provided by two barrels. The winding rotor has a system that can adjust its geometry according to the wearer’s activity level. The watchmaker believes that this will optimize the performance of the winding mechanism. In addition, Richard Mille uses a free-spring balance wheel with screws. The bottom plate, plywood and balance plywood are made of PVD ​​coated grade 5 titanium, which makes the mechanical device more stable. top replica watch

Richard Mille RM 60-01 Les Voiles De St Barth is equipped with a rubber strap with a pin buckle.

Richard Miller

RM 60-01 automatic flyback chronograph Les Voiles De St Barth

refer to
Not applicable

Case material
Titanium and carbon TPT

Diameter: 50 mm

Height: 16.33 mm

Water resistance
10 bar (~100 m)

Sapphire crystal (anti-reflective coating on both sides)

Rubber with pin buckle

Richard Mille RMAC2

Movement type
Automatic winding

Power reserve
55 hours

28,800 vph (4 Hz)

Hours, minutes, small seconds, second time zone, flyback chronograph with countdown totalizer, annual calendar with date and month, rotating bezel with compass, locking crown