Bugatti Chiron 16-cylinder tourbillon by Bugatti and Jacob & Co.


Gearheads, this watch replicas cheap is for you. It boasts a dizzying array of mechanical features, including 16 cylinders with actual moving pistons, designed to mimic the Bugatti Chiron’s engine. I recently broke the news about this watch in my Perfect Time column on, but let’s take a closer look at it now. This is the third watch released to celebrate the collaboration between these two powerful brands.

Meet the Jacob & Co. Bugatti Chiron 16-cylinder Tourbillon Engine
“To capture the spirit and energy of the high-performance Bugatti Chiron, Jacob & Co. spent about a year in the development phase before unveiling the new $280,000 Bugatti Chiron Tourbillon. The movement of the engine, complete with crankshaft and pistons. In fact, the 16-cylinder piston engine with manual winding movement is composed of a large number of 578 hand-assembled parts.”

In addition to providing hours and minutes, the movement of the Jacob & Co. Bugatti Chiron Tourbillon is equipped with a newly designed one-minute tourbillon carriage inclined at 30 degrees. This inclination provides an excellent view of the constantly rotating escapement, and it compensates for timekeeping errors due to the effect of gravity on the watch when the watch is in certain positions on the wrist. The development of this new escapement, visible through the Bugatti grille-like aperture in the dial, itself took a full year to develop.

best car inspiration
The watch is equipped with a button on the right side of the case, and when activated, the crankshaft spins and pushes the piston up and down – just like a car engine. There are also two turbochargers that spin while the engine is running. A stainless steel crankshaft is one of the smallest and most complex parts to manufacture. high quality watches replica

“The movement of the Bugatti Chiron Tourbillon is suspended inside the case, with four shock absorbers similar to the shock absorbers in a car. Because of these vibrations, when the wearer moves, the movement actually bobs up and down slightly inside the case The creation of this patented design was also challenging as it required a special traverse system so that the crown post could withstand the up and down movement of the crown in the case. The JCAM37 movement is also equipped with an Incabloc anti-shock system and a 60-hour power reserve. “

Housed in a powerful black titanium case inspired by the lines of the Chiron, the watch has an overall stealthy allure despite its bulk. Thanks to the impressive sapphire crystal, the wearer can see the engine inside, making this watch like wearing a car on your wrist. Even the sides of the case are sapphire for a better view of all the moving parts. The EB (Bugatti) logo appears on the engine compartment and the Jacob & Co. logo appears on the flying tourbillon. The crow used to set the time and wind the movement is located at the bottom of the case. The watch comes with a black rubber strap. Essentially, aside from the black case and steel parts, the only real color is the Chiron blue hands and certain movement parts.

Jacob & Co. Bugatti Chiron 16-cylinder Tourbillon Specifications
Movement: Manufactured by Jacob&Co. Manual winding JCAM37 Dimensions: 41.7x36mm
Height: 15.60 mm
Components: 578
gems: 51
Anti-vibration system: Incabloc
Power reserve: 60 hours
Frequency: 21’600 vib/h (3Hz)

  1. hours, minutes
  2. 1 minute tourbillon cage tilted at 30°
  3. “W16 Engine” in a sapphire block
  4. An on-demand animation (the pusher on the right) produces the rotation of the piston and crankshaft
  5. Power reserve indicator at 3 o’clock

Dimensions: 54x44mm
Height: 20mm
Material: black titanium
Crystal: Anti-reflective sapphire crystal Case back: Sapphire crystal
Crown and Pushers: Black Titanium DLC Water Resistance: 30m (3atm)

Winding and time setting:
Left handle: time setting
Central stem: Sport winding (clockwise) and animation (counterclockwise)

Strap and buckle:
Strap: Rubber
Buckle: Titanium folding clasp

Reference Number: AF321.40.BA.AD.ABSAA